Multiplex Assay Kit for Bone Morphogenetic Protein 4 (BMP4) ,etc. by CBA (Cytometric Bead Array)

BMP2B; BMP2-B; BMP2B1; ZYME; DVR4; Bone morphogenetic protein 2B

Specificity

This assay has high sensitivity and excellent specificity for detection of Bone Morphogenetic Protein 4 (BMP4) ,etc. by CBA (Cytometric Bead Array).
No significant cross-reactivity or interference between Bone Morphogenetic Protein 4 (BMP4) ,etc. by CBA (Cytometric Bead Array) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Bone Morphogenetic Protein 4 (BMP4) ,etc. by CBA (Cytometric Bead Array) and the recovery rates were calculated by comparing the measured value to the expected amount of Bone Morphogenetic Protein 4 (BMP4) ,etc. by CBA (Cytometric Bead Array) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 85-92 88
EDTA plasma(n=5) 91-98 95
heparin plasma(n=5) 89-101 97

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Bone Morphogenetic Protein 4 (BMP4) ,etc. by CBA (Cytometric Bead Array) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Bone Morphogenetic Protein 4 (BMP4) ,etc. by CBA (Cytometric Bead Array) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Bone Morphogenetic Protein 4 (BMP4) ,etc. by CBA (Cytometric Bead Array) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 81-90% 90-104% 90-97% 98-105%
EDTA plasma(n=5) 96-105% 78-94% 91-103% 93-101%
heparin plasma(n=5) 93-101% 80-89% 80-95% 87-104%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity

Assay procedure summary

1. Add 200μL analysis buffer solution to each well of the plate for pre-wetting;
2. Preparation of standards, reagents and samples before the experiment;
3. Add 100μL standard or sample to each well, add 10μL magnetic beads, and incubate 120 minutes protect from light at 25°C on shaker;
4. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent A. Incubate 60 minutes protect from light at 25°C on shaker;
5. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent B, and incubate 30 minutes protect from light at 25°C on shaker;
6. Wash plate once on magnetic frame;
7. Add 100μL sheath fluid, swirl for 10 minutes, read on the machine.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Journal of Cellular Biochemistry Titanium with Nanotopography Induces Osteoblast Differentiation by Regulating Endogenous Bone Morphogenetic Protein Expression and Signaling Pathway PubMed: 26681207
Domestic Animal Endocrinology Expression analysis of bone morphogenetic protein 4 between fat and lean birds in adipose tissue and serum Pubmed:26945137
FEBS Open Bio Bone morphogenetic protein 4 (BMP 4) regulates immortalized chicken preadipocyte proliferation by promoting G1/S cell cycle progression Pubmed: 30972973
Arch Gynecol Obstet The relationship between transforming growth factor β superfamily members (GDF11 and BMP4) and lumbar spine bone mineral density in postmenopausal Chinese … 34417839
Catalog No. Related products for research use of Bos taurus; Bovine (Cattle) Organism species Applications (RESEARCH USE ONLY!)
RPA014Bo01 Recombinant Bone Morphogenetic Protein 4 (BMP4) Positive Control; Immunogen; SDS-PAGE; WB.
APA014Bo01 Active Bone Morphogenetic Protein 4 (BMP4) Cell culture; Activity Assays.
PAA014Bo01 Polyclonal Antibody to Bone Morphogenetic Protein 4 (BMP4) Testing in progress
LAA014Bo71 Biotin-Linked Polyclonal Antibody to Bone Morphogenetic Protein 4 (BMP4) WB; IHC; ICC.
MAA014Bo21 Monoclonal Antibody to Bone Morphogenetic Protein 4 (BMP4) WB; IHC; ICC; IP.
SEA014Bo ELISA Kit for Bone Morphogenetic Protein 4 (BMP4) Enzyme-linked immunosorbent assay for Antigen Detection.
SCA014Bo CLIA Kit for Bone Morphogenetic Protein 4 (BMP4) Chemiluminescent immunoassay for Antigen Detection.
LMA014Bo Multiplex Assay Kit for Bone Morphogenetic Protein 4 (BMP4) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
CMA014Bo Multiplex Assay Kit for Bone Morphogenetic Protein 4 (BMP4) ,etc. by CBA (Cytometric Bead Array) FLIA Kit for Antigen Detection.