Multiplex Assay Kit for S100 Calcium Binding Protein A11 (S100A11) ,etc. by CBA (Cytometric Bead Array)

S100-A11; S100C; MLN70; Protein S100-C; Calgizzarin; Metastatic lymph node gene 70 protein; Protein S100-A11, N-terminally processed

Specificity

This assay has high sensitivity and excellent specificity for detection of S100 Calcium Binding Protein A11 (S100A11) ,etc. by CBA (Cytometric Bead Array).
No significant cross-reactivity or interference between S100 Calcium Binding Protein A11 (S100A11) ,etc. by CBA (Cytometric Bead Array) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant S100 Calcium Binding Protein A11 (S100A11) ,etc. by CBA (Cytometric Bead Array) and the recovery rates were calculated by comparing the measured value to the expected amount of S100 Calcium Binding Protein A11 (S100A11) ,etc. by CBA (Cytometric Bead Array) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 95-103 99
EDTA plasma(n=5) 80-104 91
heparin plasma(n=5) 86-94 89

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level S100 Calcium Binding Protein A11 (S100A11) ,etc. by CBA (Cytometric Bead Array) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level S100 Calcium Binding Protein A11 (S100A11) ,etc. by CBA (Cytometric Bead Array) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of S100 Calcium Binding Protein A11 (S100A11) ,etc. by CBA (Cytometric Bead Array) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 88-99% 96-104% 79-93% 88-102%
EDTA plasma(n=5) 83-90% 81-88% 85-94% 86-103%
heparin plasma(n=5) 95-104% 82-96% 96-103% 82-92%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity

Assay procedure summary

1. Add 200μL analysis buffer solution to each well of the plate for pre-wetting;
2. Preparation of standards, reagents and samples before the experiment;
3. Add 100μL standard or sample to each well, add 10μL magnetic beads, and incubate 120 minutes protect from light at 25°C on shaker;
4. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent A. Incubate 60 minutes protect from light at 25°C on shaker;
5. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent B, and incubate 30 minutes protect from light at 25°C on shaker;
6. Wash plate once on magnetic frame;
7. Add 100μL sheath fluid, swirl for 10 minutes, read on the machine.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Gastroenterology Tu1938-Micronutrients Assessment in Patients with Cirrhosis 10.1016:S0016-5085(18)33544-3
Gastroenterology Tu1942-PI3K/AKT-Mediated Upregulation of C7 Inhibits Colorectal Cancer Proliferation and Metastasis 10.1016:S0016-5085(18)33544-5
Journal of Proteomics Salivary proteins from dysplastic leukoplakia and oral squamous cell carcinoma and their potential for early detection Pubmed: 31706945
scandinavian journal of clinical & laboratory investigation Serum S100A6, S100A8, S100A9 and S100A11 proteins in colorectal neoplasia: results of a single centre prospective study Pubmed: 31856598
Catalog No. Related products for research use of Oryctolagus cuniculus (Rabbit) Organism species Applications (RESEARCH USE ONLY!)
RPA568Rb01 Recombinant S100 Calcium Binding Protein A11 (S100A11) Positive Control; Immunogen; SDS-PAGE; WB.
PAA568Rb01 Polyclonal Antibody to S100 Calcium Binding Protein A11 (S100A11) WB; IHC; ICC; IP.
PAA568Rb52 Polyclonal Antibody to S100 Calcium Binding Protein A11 (S100A11) WB; IHC; ICC; IP.
PAA568Rb51 Polyclonal Antibody to S100 Calcium Binding Protein A11 (S100A11) WB
LAA568Rb71 Biotin-Linked Polyclonal Antibody to S100 Calcium Binding Protein A11 (S100A11) WB; IHC; ICC.
LAA568Rb81 FITC-Linked Polyclonal Antibody to S100 Calcium Binding Protein A11 (S100A11) WB; IHC; ICC; IF.
SEA568Rb ELISA Kit for S100 Calcium Binding Protein A11 (S100A11) Enzyme-linked immunosorbent assay for Antigen Detection.
LMA568Rb Multiplex Assay Kit for S100 Calcium Binding Protein A11 (S100A11) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
CMA568Rb Multiplex Assay Kit for S100 Calcium Binding Protein A11 (S100A11) ,etc. by CBA (Cytometric Bead Array) FLIA Kit for Antigen Detection.
KSA568Rb01 ELISA Kit DIY Materials for S100 Calcium Binding Protein A11 (S100A11) Main materials for "Do It (ELISA Kit) Yourself".