≡

Multiplex Assay Kit for Ficolin 1 (FCN1) ,etc. by CBA (Cytometric Bead Array)

FCNM; Collagen/fibrinogen domain-containing protein 1; Ficolin-alpha; Ficolin-A; M-ficolin

Specificity

This assay has high sensitivity and excellent specificity for detection of Ficolin 1 (FCN1) ,etc. by CBA (Cytometric Bead Array).
No significant cross-reactivity or interference between Ficolin 1 (FCN1) ,etc. by CBA (Cytometric Bead Array) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Ficolin 1 (FCN1) ,etc. by CBA (Cytometric Bead Array) and the recovery rates were calculated by comparing the measured value to the expected amount of Ficolin 1 (FCN1) ,etc. by CBA (Cytometric Bead Array) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 85-105 90
EDTA plasma(n=5) 93-101 97
heparin plasma(n=5) 88-104 97

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Ficolin 1 (FCN1) ,etc. by CBA (Cytometric Bead Array) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Ficolin 1 (FCN1) ,etc. by CBA (Cytometric Bead Array) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Ficolin 1 (FCN1) ,etc. by CBA (Cytometric Bead Array) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 98-105% 93-101% 98-105% 91-102%
EDTA plasma(n=5) 93-102% 80-92% 98-105% 95-104%
heparin plasma(n=5) 79-90% 98-105% 96-103% 96-105%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
96-well plate 1 Plate sealer for 96 wells 4
Pre-Mixed Standard 2 Standard Diluent 1×20mL
Pre-Mixed Magnetic beads (22#:FCN1) 1 Analysis buffer 1×20mL
Pre-Mixed Detection Reagent A 1×120μL Assay Diluent A 1×12mL
Detection Reagent B (PE-SA) 1×120μL Assay Diluent B 1×12mL
Sheath Fluid 1×10mL Wash Buffer (30 × concentrate) 1×20mL
Instruction manual 1

Assay procedure summary

1. Add 200μL analysis buffer solution to each well of the plate for pre-wetting;
2. Preparation of standards, reagents and samples before the experiment;
3. Add 100μL standard or sample to each well, add 10μL magnetic beads, and incubate 120 minutes protect from light at 25°C on shaker;
4. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent A. Incubate 60 minutes protect from light at 25°C on shaker;
5. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent B, and incubate 30 minutes protect from light at 25°C on shaker;
6. Wash plate once on magnetic frame;
7. Add 100μL sheath fluid, swirl for 10 minutes, read on the machine.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
ACTA TROPICA Novel findings on the role of ficolins and colectins in the innate response against Leishmania braziliensis Pubmed: 32827456
LIFE SCIENCES The lectin pathway of complement and the initial recognition of Leishmania infantum promastigotes 34242658
Catalog No. Related products for research use of Rattus norvegicus (Rat) Organism species Applications (RESEARCH USE ONLY!)
RPA786Ra01 Recombinant Ficolin 1 (FCN1) Positive Control; Immunogen; SDS-PAGE; WB.
PAA786Ra01 Polyclonal Antibody to Ficolin 1 (FCN1) WB; IHC
MAA786Ra21 Monoclonal Antibody to Ficolin 1 (FCN1) WB; IHC; ICC; IP.
SEA786Ra ELISA Kit for Ficolin 1 (FCN1) Enzyme-linked immunosorbent assay for Antigen Detection.
SCA786Ra CLIA Kit for Ficolin 1 (FCN1) Chemiluminescent immunoassay for Antigen Detection.
LMA786Ra Multiplex Assay Kit for Ficolin 1 (FCN1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
CMA786Ra Multiplex Assay Kit for Ficolin 1 (FCN1) ,etc. by CBA (Cytometric Bead Array) FLIA Kit for Antigen Detection.
KSA786Ra01 ELISA Kit DIY Materials for Ficolin 1 (FCN1) Main materials for "Do It (ELISA Kit) Yourself".