Multiplex Assay Kit for Deoxyribonuclease I (DNASE1) ,etc. by CBA (Cytometric Bead Array)

DNaseI; DNL1; DRNI; DNase-I; Dornase alfa

Specificity

This assay has high sensitivity and excellent specificity for detection of Deoxyribonuclease I (DNASE1) ,etc. by CBA (Cytometric Bead Array).
No significant cross-reactivity or interference between Deoxyribonuclease I (DNASE1) ,etc. by CBA (Cytometric Bead Array) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Deoxyribonuclease I (DNASE1) ,etc. by CBA (Cytometric Bead Array) and the recovery rates were calculated by comparing the measured value to the expected amount of Deoxyribonuclease I (DNASE1) ,etc. by CBA (Cytometric Bead Array) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 97-104 101
EDTA plasma(n=5) 85-97 92
heparin plasma(n=5) 86-95 89

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Deoxyribonuclease I (DNASE1) ,etc. by CBA (Cytometric Bead Array) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Deoxyribonuclease I (DNASE1) ,etc. by CBA (Cytometric Bead Array) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Deoxyribonuclease I (DNASE1) ,etc. by CBA (Cytometric Bead Array) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 87-95% 80-91% 91-98% 95-103%
EDTA plasma(n=5) 91-102% 94-102% 79-102% 90-104%
heparin plasma(n=5) 91-105% 85-99% 85-99% 78-99%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity

Assay procedure summary

1. Add 200μL analysis buffer solution to each well of the plate for pre-wetting;
2. Preparation of standards, reagents and samples before the experiment;
3. Add 100μL standard or sample to each well, add 10μL magnetic beads, and incubate 120 minutes protect from light at 25°C on shaker;
4. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent A. Incubate 60 minutes protect from light at 25°C on shaker;
5. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent B, and incubate 30 minutes protect from light at 25°C on shaker;
6. Wash plate once on magnetic frame;
7. Add 100μL sheath fluid, swirl for 10 minutes, read on the machine.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
J Card Fail Low Circulating Levels of Mitochondrial and High Levels of Nuclear DNA Predict Mortality in Chronic Heart Failure Pubmed:27349571
Biochimie Inhibition of nuclease activity by a splice-switching oligonucleotide targeting deoxyribonuclease 1 mRNA prevents apoptosis progression and prolong viability of … Pubmed: 32315661
Scientific Reports Biomarkers of neutrophil extracellular traps (NETs) and nitric oxide-(NO)-dependent oxidative stress in women who miscarried Pubmed: 32753622
J Am Heart Assoc DNase 1 Protects From Increased Thrombin Generation and Venous Thrombosis During Aging: Cross‐Sectional Study in Mice and Humans Pubmed:35023342
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
APB127Hu01 Active Deoxyribonuclease I (DNASE1) Cell culture; Activity Assays.
RPB127Hu01 Recombinant Deoxyribonuclease I (DNASE1) Positive Control; Immunogen; SDS-PAGE; WB.
PAB127Hu01 Polyclonal Antibody to Deoxyribonuclease I (DNASE1) WB,IHC
LAB127Hu81 FITC-Linked Polyclonal Antibody to Deoxyribonuclease I (DNASE1) WB; IHC; ICC; IF.
LAB127Hu71 Biotin-Linked Polyclonal Antibody to Deoxyribonuclease I (DNASE1) WB
MAB127Hu22 Monoclonal Antibody to Deoxyribonuclease I (DNASE1) WB,IHC
MAB127Hu21 Monoclonal Antibody to Deoxyribonuclease I (DNASE1) WB
LAB127Hu82 FITC-Linked Monoclonal Antibody to Deoxyribonuclease I (DNASE1) WB; IHC; ICC; IF.
LAB127Hu72 Biotin-Linked Monoclonal Antibody to Deoxyribonuclease I (DNASE1) WB; IHC; ICC.
SEB127Hu ELISA Kit for Deoxyribonuclease I (DNASE1) Enzyme-linked immunosorbent assay for Antigen Detection.
LMB127Hu Multiplex Assay Kit for Deoxyribonuclease I (DNASE1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
CMB127Hu Multiplex Assay Kit for Deoxyribonuclease I (DNASE1) ,etc. by CBA (Cytometric Bead Array) FLIA Kit for Antigen Detection.