Multiplex Assay Kit for Aggrecan (AGC) ,etc. by CBA (Cytometric Bead Array)

ACAN; AGC1; AGCAN; CSPG1; CSPCP; CSPGCP; MSK16; SEDK; Cartilage-specific proteoglycan core protein; Large Aggregating Proteoglycan; Chondroitin Sulfate Proteoglycan 1

Specificity

This assay has high sensitivity and excellent specificity for detection of Aggrecan (AGC) ,etc. by CBA (Cytometric Bead Array).
No significant cross-reactivity or interference between Aggrecan (AGC) ,etc. by CBA (Cytometric Bead Array) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Aggrecan (AGC) ,etc. by CBA (Cytometric Bead Array) and the recovery rates were calculated by comparing the measured value to the expected amount of Aggrecan (AGC) ,etc. by CBA (Cytometric Bead Array) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 86-105 94
EDTA plasma(n=5) 90-105 102
heparin plasma(n=5) 90-103 94

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Aggrecan (AGC) ,etc. by CBA (Cytometric Bead Array) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Aggrecan (AGC) ,etc. by CBA (Cytometric Bead Array) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Aggrecan (AGC) ,etc. by CBA (Cytometric Bead Array) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 84-98% 78-101% 83-97% 81-90%
EDTA plasma(n=5) 91-101% 99-105% 90-98% 79-91%
heparin plasma(n=5) 79-102% 81-98% 92-101% 82-89%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity

Assay procedure summary

1. Add 200μL analysis buffer solution to each well of the plate for pre-wetting;
2. Preparation of standards, reagents and samples before the experiment;
3. Add 100μL standard or sample to each well, add 10μL magnetic beads, and incubate 120 minutes protect from light at 25°C on shaker;
4. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent A. Incubate 60 minutes protect from light at 25°C on shaker;
5. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent B, and incubate 30 minutes protect from light at 25°C on shaker;
6. Wash plate once on magnetic frame;
7. Add 100μL sheath fluid, swirl for 10 minutes, read on the machine.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Experimental Biology and Medicine Acidic pH conditions mimicking degenerative intervertebral discs impair the survival and biological behavior of human adipose-derived mesenchymal stem cells Rsmjournals: Source
Age( dordr). In vitro tenocyte metabolism in aging and oestrogen deficiency Springer: Source
PLoS ONE A Combinatorial Relative Mass Value Evaluation of Endogenous Bioactive Proteins in Three-Dimensional Cultured Nucleus Pulposus Cells of Herniated Intervertebral Discs: Identification of Potential Target Proteins for Gene Therapeutic Approaches Plosone: Source
Stem Cell Research & Therapy Protein synthesis and secretion in human mesenchymal cells derived from bone marrow, adipose tissue and Wharton's jelly. Pubmed: 24739658
Materials Science and Engineering: C Co-electrospun gelatin-poly(l-lactic acid) scaffolds: Modulation of mechanical properties and chondrocyte response as a function of composition ScienceDirect: S0928493113006656
PLoS One. Mesenchymal stromal cell proliferation, gene expression and protein production in human platelet-rich plasma-supplemented media Pubmed:Pmc4130592
Connective Tissue Research Metabolic and cytoprotective effects of in vivo peri-patellar hyaluronic acid injections in cultured tenocytes Pubmed:25333747
Macromolecular Bioscience Highly Porous Gelatin Reinforced 4D Scaffolds for Articular Cartilage Regeneration PubMed: 25787871
Osteoarthritis and Cartilage Parathyroid hormone(1-34) exhibits more comprehensive effects than celecoxib in cartilage metabolism and maintaining subchondral bone micro-architecture in meniscectomized Cavia (Guinea pig )inea pigs Pubmed:26802547
Cell Proliferation Effects of low oxygen tension on gene profile of soluble growth factors in co‐cultured adipose‐derived stromal cells and chondrocytes Pubmed:27090063
bmc musculoskeletal disorders Strontium ranelate causes osteophytes overgrowth in a model of early phase osteoarthritis. pubmed:28187731
Journal of Clinical Medicine Aggrecan Turnover in Women with Rheumatoid Arthritis Treated with TNF-α Inhibitors Pubmed: 32392807
Loss of autophagy in tibial plateau chondrocytes causes increased apoptosis of chondrocytes in spontaneous osteoarthritis of guinea pigs
researchsquare Aggrecan-a new biomarker for acute type A aortic dissection 33990642
Catalog No. Related products for research use of Sus scrofa; Porcine (Pig) Organism species Applications (RESEARCH USE ONLY!)
SEB908Po ELISA Kit for Aggrecan (AGC) Enzyme-linked immunosorbent assay for Antigen Detection.
LMB908Po Multiplex Assay Kit for Aggrecan (AGC) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
CMB908Po Multiplex Assay Kit for Aggrecan (AGC) ,etc. by CBA (Cytometric Bead Array) FLIA Kit for Antigen Detection.