Multiplex Assay Kit for Fibulin 1 (FBLN1) ,etc. by CBA (Cytometric Bead Array)

Specificity

This assay has high sensitivity and excellent specificity for detection of Fibulin 1 (FBLN1) ,etc. by CBA (Cytometric Bead Array).
No significant cross-reactivity or interference between Fibulin 1 (FBLN1) ,etc. by CBA (Cytometric Bead Array) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Fibulin 1 (FBLN1) ,etc. by CBA (Cytometric Bead Array) and the recovery rates were calculated by comparing the measured value to the expected amount of Fibulin 1 (FBLN1) ,etc. by CBA (Cytometric Bead Array) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 88-96 92
EDTA plasma(n=5) 84-98 88
heparin plasma(n=5) 89-96 92

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Fibulin 1 (FBLN1) ,etc. by CBA (Cytometric Bead Array) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Fibulin 1 (FBLN1) ,etc. by CBA (Cytometric Bead Array) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Fibulin 1 (FBLN1) ,etc. by CBA (Cytometric Bead Array) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 90-104% 84-101% 91-105% 89-104%
EDTA plasma(n=5) 78-97% 83-97% 80-96% 89-101%
heparin plasma(n=5) 97-105% 84-101% 92-99% 79-103%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity

Assay procedure summary

1. Add 200μL analysis buffer solution to each well of the plate for pre-wetting;
2. Preparation of standards, reagents and samples before the experiment;
3. Add 100μL standard or sample to each well, add 10μL magnetic beads, and incubate 120 minutes protect from light at 25°C on shaker;
4. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent A. Incubate 60 minutes protect from light at 25°C on shaker;
5. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent B, and incubate 30 minutes protect from light at 25°C on shaker;
6. Wash plate once on magnetic frame;
7. Add 100μL sheath fluid, swirl for 10 minutes, read on the machine.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Clin Exp Metastasis. Augmented expression of urokinase plasminogen activator and extracellular matrix proteins associates with multiple myeloma progression Pubmed:24807734
Proteomics Clinical Applications Comparative mass spectrometric and immunoassay‐based proteome analysis in serum of Duchenne muscular dystrophy patients Pubmed:26680509
PROTEOMICS - Clinical Applications Comparative mass spectrometric and immunoassay-based proteome analysis in serum ofDuchenne muscular dystrophy patients. pubmed:26680509
ENVIRONMENTAL RESEARCH Exploration of identifying novel serum biomarkers for malignant mesothelioma using iTRAQ combined with 2D-LC-MS/MS Pubmed: 33197421
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPC472Hu02 Recombinant Fibulin 1 (FBLN1) Positive Control; Immunogen; SDS-PAGE; WB.
RPC472Hu03 Recombinant Fibulin 1 (FBLN1) Positive Control; Immunogen; SDS-PAGE; WB.
RPC472Hu01 Recombinant Fibulin 1 (FBLN1) Positive Control; Immunogen; SDS-PAGE; WB.
PAC472Hu02 Polyclonal Antibody to Fibulin 1 (FBLN1) WB
PAC472Hu01 Polyclonal Antibody to Fibulin 1 (FBLN1) WB
PAC472Hu03 Polyclonal Antibody to Fibulin 1 (FBLN1) WB
FAC472Hu01 Anti-Fibulin 1 (FBLN1) Polyclonal Antibody FCM
FAC472Hu03 Anti-Fibulin 1 (FBLN1) Polyclonal Antibody FCM
LAC472Hu71 Biotin-Linked Polyclonal Antibody to Fibulin 1 (FBLN1) WB; IHC; ICC.
MAC472Hu23 Monoclonal Antibody to Fibulin 1 (FBLN1) ICC/IF
MAC472Hu21 Monoclonal Antibody to Fibulin 1 (FBLN1) WB; IHC
MAC472Hu22 Monoclonal Antibody to Fibulin 1 (FBLN1) WB; IHC
FAC472Hu02 Anti-Fibulin 1 (FBLN1) Monoclonal Antibody FCM
LAC472Hu72 Biotin-Linked Monoclonal Antibody to Fibulin 1 (FBLN1) WB; IHC; ICC.
SEC472Hu ELISA Kit for Fibulin 1 (FBLN1) Enzyme-linked immunosorbent assay for Antigen Detection.
SCC472Hu CLIA Kit for Fibulin 1 (FBLN1) Chemiluminescent immunoassay for Antigen Detection.
CMC472Hu Multiplex Assay Kit for Fibulin 1 (FBLN1) ,etc. by CBA (Cytometric Bead Array) FLIA Kit for Antigen Detection.
LMC472Hu Multiplex Assay Kit for Fibulin 1 (FBLN1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
PSC472Hu01 Antibody Pair for Fibulin 1 (FBLN1) ELISA; CLIA; ELISPOT; Luminex; Immunochromatography and other Immunoassays.
KSC472Hu01 ELISA Kit DIY Materials for Fibulin 1 (FBLN1) Main materials for "Do It (ELISA Kit) Yourself".