Multiplex Assay Kit for Cystatin 1 (CST1) ,etc. by CBA (Cytometric Bead Array)

Cystatin SN; Salivary cystatin-SA-1

Specificity

This assay has high sensitivity and excellent specificity for detection of Cystatin 1 (CST1) ,etc. by CBA (Cytometric Bead Array).
No significant cross-reactivity or interference between Cystatin 1 (CST1) ,etc. by CBA (Cytometric Bead Array) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Cystatin 1 (CST1) ,etc. by CBA (Cytometric Bead Array) and the recovery rates were calculated by comparing the measured value to the expected amount of Cystatin 1 (CST1) ,etc. by CBA (Cytometric Bead Array) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 92-104 98
EDTA plasma(n=5) 79-99 95
heparin plasma(n=5) 89-97 93

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Cystatin 1 (CST1) ,etc. by CBA (Cytometric Bead Array) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Cystatin 1 (CST1) ,etc. by CBA (Cytometric Bead Array) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Cystatin 1 (CST1) ,etc. by CBA (Cytometric Bead Array) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 78-88% 92-101% 80-98% 91-99%
EDTA plasma(n=5) 80-92% 91-99% 80-89% 80-97%
heparin plasma(n=5) 93-105% 92-99% 78-89% 86-95%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity

Assay procedure summary

1. Add 200μL analysis buffer solution to each well of the plate for pre-wetting;
2. Preparation of standards, reagents and samples before the experiment;
3. Add 100μL standard or sample to each well, add 10μL magnetic beads, and incubate 120 minutes protect from light at 25°C on shaker;
4. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent A. Incubate 60 minutes protect from light at 25°C on shaker;
5. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent B, and incubate 30 minutes protect from light at 25°C on shaker;
6. Wash plate once on magnetic frame;
7. Add 100μL sheath fluid, swirl for 10 minutes, read on the machine.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Metabolomics Salivary markers of taste sensitivity to oleic acid: a combined proteomics and metabolomics approach Springer: Source
Allergy Artemisia annua sublingual immunotherapy for seasonal allergic rhinitis: a randomized controlled trial Pubmed: 32030780
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPJ330Hu01 Recombinant Cystatin 1 (CST1) Positive Control; Immunogen; SDS-PAGE; WB.
PAJ330Hu01 Polyclonal Antibody to Cystatin 1 (CST1) WB; IHC; ICC; IP.
LAJ330Hu71 Biotin-Linked Polyclonal Antibody to Cystatin 1 (CST1) WB
LAJ330Hu81 FITC-Linked Polyclonal Antibody to Cystatin 1 (CST1) WB; IHC; ICC; IF.
MAJ330Hu23 Monoclonal Antibody to Cystatin 1 (CST1) WB
MAJ330Hu22 Monoclonal Antibody to Cystatin 1 (CST1) WB
MAJ330Hu25 Monoclonal Antibody to Cystatin 1 (CST1) ICC/IF
MAJ330Hu24 Monoclonal Antibody to Cystatin 1 (CST1) WB
MAJ330Hu21 Monoclonal Antibody to Cystatin 1 (CST1) WB
SEJ330Hu ELISA Kit for Cystatin 1 (CST1) Enzyme-linked immunosorbent assay for Antigen Detection.
CMJ330Hu Multiplex Assay Kit for Cystatin 1 (CST1) ,etc. by CBA (Cytometric Bead Array) FLIA Kit for Antigen Detection.
LMJ330Hu Multiplex Assay Kit for Cystatin 1 (CST1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.