ELISA Kit for Abscisic Acid (ABA)

AB-A; abscisin II; Dormin

Specificity

This assay has high sensitivity and excellent specificity for detection of Abscisic Acid (ABA).
No significant cross-reactivity or interference between Abscisic Acid (ABA) and analogues was observed.

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Abscisic Acid (ABA) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Abscisic Acid (ABA) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

ReagentsQuantityReagentsQuantity
Pre-coated, ready to use 96-well strip plate1Plate sealer for 96 wells4
Standard2Standard Diluent1×20mL
Detection Reagent A1×120µLAssay Diluent A1×12mL
Detection Reagent B1×120µLAssay Diluent B1×12mL
TMB Substrate1×9mLStop Solution1×6mL
Wash Buffer (30 × concentrate)1×20mLInstruction manual1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 50µL standard or sample to each well.
    And then add 50µL prepared Detection Reagent A immediately.
    Shake and mix. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
5. Aspirate and wash 5 times;
6. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
7. Add 50µL Stop Solution. Read at 450 nm immediately.

Test principle

This assay employs the competitive inhibition enzyme immunoassay technique. A monoclonal antibody specific to Abscisic Acid (ABA) has been pre-coated onto a microplate. A competitive inhibition reaction is launched between biotin labeled Abscisic Acid (ABA) and unlabeled Abscisic Acid (ABA) (Standards or samples) with the pre-coated antibody specific to Abscisic Acid (ABA). After incubation the unbound conjugate is washed off. Next, avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. The amount of bound HRP conjugate is reverse proportional to the concentration of Abscisic Acid (ABA) in the sample. After addition of the substrate solution, the intensity of color developed is reverse proportional to the concentration of Abscisic Acid (ABA) in the sample.

GIVEAWAYS

INCREMENT SERVICES

Catalog No.Related products for research use of Pan-species (General) Organism speciesApplications
CPB218Ge11BSA Conjugated Abscisic Acid (ABA)Immunogen; SDS-PAGE; WB.
CPB218Ge21OVA Conjugated Abscisic Acid (ABA)Immunogen; SDS-PAGE; WB.
CPB218Ge41HSA Conjugated Abscisic Acid (ABA)Immunogen; SDS-PAGE; WB.
PAB218Ge01Polyclonal Antibody to Abscisic Acid (ABA)WB; IHC; ICC; IP.
LAB218Ge81FITC-Linked Polyclonal Antibody to Abscisic Acid (ABA)WB; IHC; ICC; IF.
CEB218GeELISA Kit for Abscisic Acid (ABA)Enzyme-linked immunosorbent assay for Antigen Detection.
KSB218Ge11ELISA Kit DIY Materials for Abscisic Acid (ABA)Main materials for "Do It (ELISA Kit) Yourself".