Multiplex Assay Kit for Coagulation Factor II (F2) ,etc. by FLIA (Flow Luminescence Immunoassay)

FII; TM; PT; Thrombin; Prothrombin; Pro-Thrombin; Activation peptide fragment 1; Activation peptide fragment 2

(Note: Up to 8-plex in one testing reaction)

Specificity

This assay has high sensitivity and excellent specificity for detection of Coagulation Factor II (F2) ,etc. by FLIA (Flow Luminescence Immunoassay).
No significant cross-reactivity or interference between Coagulation Factor II (F2) ,etc. by FLIA (Flow Luminescence Immunoassay) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Coagulation Factor II (F2) ,etc. by FLIA (Flow Luminescence Immunoassay) and the recovery rates were calculated by comparing the measured value to the expected amount of Coagulation Factor II (F2) ,etc. by FLIA (Flow Luminescence Immunoassay) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 92-101 97

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Coagulation Factor II (F2) ,etc. by FLIA (Flow Luminescence Immunoassay) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Coagulation Factor II (F2) ,etc. by FLIA (Flow Luminescence Immunoassay) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Coagulation Factor II (F2) ,etc. by FLIA (Flow Luminescence Immunoassay) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 82-103% 78-92% 98-105% 97-105%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
96-well plate 1 Plate sealer for 96 wells 4
Pre-Mixed Standard 2 Standard Diluent 1×20mL
Pre-Mixed Magnetic beads (22#:F2) 1 Analysis buffer 1×20mL
Pre-Mixed Detection Reagent A 1×120μL Assay Diluent A 1×12mL
Detection Reagent B (PE-SA) 1×120μL Assay Diluent B 1×12mL
Sheath Fluid 1×10mL Wash Buffer (30 × concentrate) 1×20mL
Instruction manual 1

Assay procedure summary

1. Preparation of standards, reagents and samples before the experiment;
2. Add 100μL standard or sample to each well,
    add 10μL magnetic beads, and incubate 90min at 37°C on shaker;
3. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent A. Incubate 60min at 37°C on shaker;
4. Wash plate on magnetic frame for three times;
5. Add 100μL prepared Detection Reagent B, and incubate 30 min at 37°C on shaker;
6. Wash plate on magnetic frame for three times;
7. Add 100μL sheath solution, swirl for 2 minutes, read on the machine.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Blood Cells Mol Dis Upregulation of cytokine signalling in platelets increases risk of thrombophilia in severe COVID-19 patients Pubmed:35180460
Catalog No. Related products for research use of Rattus norvegicus (Rat) Organism species Applications (RESEARCH USE ONLY!)
RPA820Ra03 Recombinant Coagulation Factor II (F2) Positive Control; Immunogen; SDS-PAGE; WB.
RPA820Ra02 Recombinant Coagulation Factor II (F2) Positive Control; Immunogen; SDS-PAGE; WB.
RPA820Ra01 Recombinant Coagulation Factor II (F2) Positive Control; Immunogen; SDS-PAGE; WB.
APA820Ra02 Active Coagulation Factor II (F2) Cell culture; Activity Assays.
PAA820Ra02 Polyclonal Antibody to Coagulation Factor II (F2) WB; IHC; ICC; IP.
PAA820Ra03 Polyclonal Antibody to Coagulation Factor II (F2) WB; IHC; ICC; IP.
PAA820Ra01 Polyclonal Antibody to Coagulation Factor II (F2) WB; IHC; ICC; IP.
LAA820Ra71 Biotin-Linked Polyclonal Antibody to Coagulation Factor II (F2) WB; IHC; ICC.
LAA820Ra81 FITC-Linked Polyclonal Antibody to Coagulation Factor II (F2) WB; IHC; ICC; IF.
MAA820Ra29 Monoclonal Antibody to Coagulation Factor II (F2) WB; IHC; ICC; IP.
MAA820Ra21 Monoclonal Antibody to Coagulation Factor II (F2) WB
MAA820Ra23 Monoclonal Antibody to Coagulation Factor II (F2) WB; IHC; ICC; IP.
MAA820Ra24 Monoclonal Antibody to Coagulation Factor II (F2) WB; IHC; ICC; IP.
MAA820Ra25 Monoclonal Antibody to Coagulation Factor II (F2) WB; IHC; ICC; IP.
MAA820Ra27 Monoclonal Antibody to Coagulation Factor II (F2) WB; IHC
MAA820Ra22 Monoclonal Antibody to Coagulation Factor II (F2) WB,IHC
SEA820Ra ELISA Kit for Coagulation Factor II (F2) Enzyme-linked immunosorbent assay for Antigen Detection.
LMA820Ra Multiplex Assay Kit for Coagulation Factor II (F2) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSA820Ra01 ELISA Kit DIY Materials for Coagulation Factor II (F2) Main materials for "Do It (ELISA Kit) Yourself".