≡

OneStep ELISA Kit for Chitinase 1 (CHIT1)

CHI3; Chitotriosidase

Specificity

This assay has high sensitivity and excellent specificity for detection of Chitinase 1 (CHIT1).
No significant cross-reactivity or interference between Chitinase 1 (CHIT1) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Chitinase 1 (CHIT1) and the recovery rates were calculated by comparing the measured value to the expected amount of Chitinase 1 (CHIT1) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 79-94 88
EDTA plasma(n=5) 86-95 90
heparin plasma(n=5) 82-94 89

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Chitinase 1 (CHIT1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Chitinase 1 (CHIT1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Chitinase 1 (CHIT1) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 89-104% 83-93% 80-93% 97-105%
EDTA plasma(n=5) 94-105% 86-93% 97-104% 91-101%
heparin plasma(n=5) 95-102% 89-101% 96-105% 91-98%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 50µL standard or sample to each well, then add 50µL prepared Detection Reagent A to each well. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
5. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Eur J Pharmacol Inhibition of CHIT1 as a novel therapeutic approach in idiopathic pulmonary fibrosis Pubmed:35122869
Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
RPJ374Mu02 Recombinant Chitinase 1 (CHIT1) Positive Control; Immunogen; SDS-PAGE; WB.
RPJ374Mu01 Recombinant Chitinase 1 (CHIT1) Positive Control; Immunogen; SDS-PAGE; WB.
PAJ374Mu02 Polyclonal Antibody to Chitinase 1 (CHIT1) WB
PAJ374Mu01 Polyclonal Antibody to Chitinase 1 (CHIT1) WB; IHC
SEJ374Mu ELISA Kit for Chitinase 1 (CHIT1) Enzyme-linked immunosorbent assay for Antigen Detection.
OEJ374Mu OneStep ELISA Kit for Chitinase 1 (CHIT1) Enzyme-linked immunosorbent assay for Antigen Detection.
LMJ374Mu Multiplex Assay Kit for Chitinase 1 (CHIT1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
CMJ374Mu Multiplex Assay Kit for Chitinase 1 (CHIT1) ,etc. by CBA (Cytometric Bead Array) FLIA Kit for Antigen Detection.