ELISA Kit for Urotensin 2 (UST2)

UII; U-II; UCN2; PRO1068; Urotensin-II

Specificity

This assay has high sensitivity and excellent specificity for detection of Urotensin 2 (UST2).
No significant cross-reactivity or interference between Urotensin 2 (UST2) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Urotensin 2 (UST2) and the recovery rates were calculated by comparing the measured value to the expected amount of Urotensin 2 (UST2) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 79-96 78
EDTA plasma(n=5) 84-102 94
heparin plasma(n=5) 84-95 90

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Urotensin 2 (UST2) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Urotensin 2 (UST2) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Urotensin 2 (UST2) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 80-98% 94-102% 85-99% 83-95%
EDTA plasma(n=5) 98-105% 93-105% 78-105% 93-105%
heparin plasma(n=5) 84-97% 95-103% 85-98% 89-101%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1 Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
Reagent Diluent 1×300µL Stop Solution 1×6mL
TMB Substrate 1×9mL Instruction manual 1
Wash Buffer (30 × concentrate) 1×20mL

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 50µL standard or sample to each well.
    And then add 50µL prepared Detection Reagent A immediately.
    Shake and mix. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
5. Aspirate and wash 5 times;
6. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
7. Add 50µL Stop Solution. Read at 450 nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Clinical and Experimental Hypertension Serum Urotensin II Levels in Patients with Non-Dipper Hypertension Pubmed: 23301552
Peptides Urotensin II (U-II), a novel cyclic peptide, possibly associated with the pathophysiology of osteoarthritis Pubmed: 24468547
journal of diabetes and its complications Urotensin-II level and its association with oxidative stress in early diabetic nephropathy. pubmed:25179234
Evidence-based Complementary and Alternative Medicine  Acute Biochemical, Cardiovascular, and Autonomic Response to Hyperbaric (4 atm) Exposure in Healthy Subjects Pubmed:29977313
JOURNAL OF OCULAR PHARMACOLOGY AND THERAPEUTICS The Relationship of the Urotensin-2 Level in the Aqueous Humor with Systemic Diseases and Pupil Size: Comparative Study Pubmed: 33147089
Boy kısalığı olan çocukların serum ürotensin 2 düzeylerinin igf-1 ile ilişkisi.
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPA362Hu01 Recombinant Urotensin 2 (UST2) Positive Control; Immunogen; SDS-PAGE; WB.
CPA362Hu21 OVA Conjugated Urotensin 2 (UST2) Immunogen; SDS-PAGE; WB.
CPA362Hu31 KLH Conjugated Urotensin 2 (UST2) Immunogen; SDS-PAGE; WB.
PAA362Hu01 Polyclonal Antibody to Urotensin 2 (UST2) WB; IHC; ICC; IP.
PAA362Hu08 Polyclonal Antibody to Urotensin 2 (UST2) WB; IHC; ICC; IP.
LAA362Hu71 Biotin-Linked Polyclonal Antibody to Urotensin 2 (UST2) WB; IHC; ICC.
MAA362Hu22 Monoclonal Antibody to Urotensin 2 (UST2) WB; IHC; ICC; IP.
CEA362Hu ELISA Kit for Urotensin 2 (UST2) Enzyme-linked immunosorbent assay for Antigen Detection.