ELISA Kit for Thymosin Beta 4 (TMSB4X)

Tb4; FX; PTMB4; TB4X; TMSB4; Thymosin,Beta 4,X-Linked; TB-500; Seraspenide; Hematopoietic system regulatory peptide

Specificity

This assay has high sensitivity and excellent specificity for detection of Thymosin Beta 4 (TMSB4X).
No significant cross-reactivity or interference between Thymosin Beta 4 (TMSB4X) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Thymosin Beta 4 (TMSB4X) and the recovery rates were calculated by comparing the measured value to the expected amount of Thymosin Beta 4 (TMSB4X) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 89-98 93
EDTA plasma(n=5) 82-97 87
heparin plasma(n=5) 84-95 89

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Thymosin Beta 4 (TMSB4X) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Thymosin Beta 4 (TMSB4X) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Thymosin Beta 4 (TMSB4X) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 86-97% 86-93% 84-98% 83-103%
EDTA plasma(n=5) 81-101% 88-96% 88-96% 89-96%
heparin plasma(n=5) 97-105% 84-98% 94-105% 86-101%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1 Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
Reagent Diluent 1×300µL Stop Solution 1×6mL
TMB Substrate 1×9mL Instruction manual 1
Wash Buffer (30 × concentrate) 1×20mL

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 50µL standard or sample to each well.
    And then add 50µL prepared Detection Reagent A immediately.
    Shake and mix. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
5. Aspirate and wash 5 times;
6. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
7. Add 50µL Stop Solution. Read at 450 nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPB609Hu01 Recombinant Thymosin Beta 4 (TMSB4X) Positive Control; Immunogen; SDS-PAGE; WB.
APB609Hu01 Active Thymosin Beta 4 (TMSB4X) Cell culture; Activity Assays.
EPB609Hu61 Eukaryotic Thymosin Beta 4 (TMSB4X) Positive Control; Immunogen; SDS-PAGE; WB.
CPB609Hu11 BSA Conjugated Thymosin Beta 4 (TMSB4X) Immunogen; SDS-PAGE; WB.
CPB609Hu21 OVA Conjugated Thymosin Beta 4 (TMSB4X) Immunogen; SDS-PAGE; WB.
PAB609Hu01 Polyclonal Antibody to Thymosin Beta 4 (TMSB4X) WB; IHC; ICC; IP.
PAB609Hu08 Polyclonal Antibody to Thymosin Beta 4 (TMSB4X) WB; IHC; ICC; IP.
LAB609Hu71 Biotin-Linked Polyclonal Antibody to Thymosin Beta 4 (TMSB4X) WB; IHC; ICC.
MAB609Hu21 Monoclonal Antibody to Thymosin Beta 4 (TMSB4X) WB; IHC; ICC; IP.
CEB609Hu ELISA Kit for Thymosin Beta 4 (TMSB4X) Enzyme-linked immunosorbent assay for Antigen Detection.