• Promotion
ELISA Kit for Transferrin (TRF)

TF; Siderophilin; Serotransferrin; Beta-1 metal-binding globulin

Specificity

This assay has high sensitivity and excellent specificity for detection of Transferrin (TRF).
No significant cross-reactivity or interference between Transferrin (TRF) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Transferrin (TRF) and the recovery rates were calculated by comparing the measured value to the expected amount of Transferrin (TRF) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 88-96 92
EDTA plasma(n=5) 83-97 87
heparin plasma(n=5) 80-99 94

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Transferrin (TRF) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Transferrin (TRF) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Transferrin (TRF) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 95-105% 78-98% 82-103% 87-103%
EDTA plasma(n=5) 78-102% 82-95% 97-104% 84-91%
heparin plasma(n=5) 90-102% 90-98% 97-105% 83-97%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 50µL standard or sample to each well.
    And then add 50µL prepared Detection Reagent A immediately.
    Shake and mix. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
5. Aspirate and wash 5 times;
6. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
7. Add 50µL Stop Solution. Read at 450 nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Reference
PLoS ONE Identification of Altered Plasma Proteins by Proteomic Study in Valvular Heart Diseases and the Potential Clinical Significance PubMed: PMC3754973
Physiological research The Labile Iron Pool in Monocytes Reflects the Activity of the Atherosclerotic Process in Men with Chronic Cardiovascular Disease pubmed:27782743
Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
RPC036Mu01 Recombinant Transferrin (TRF) Positive Control; Immunogen; SDS-PAGE; WB.
RPC036Mu02 Recombinant Transferrin (TRF) Positive Control; Immunogen; SDS-PAGE; WB.
PAC036Mu01 Polyclonal Antibody to Transferrin (TRF) WB; IHC; ICC; IP.
PAC036Mu02 Polyclonal Antibody to Transferrin (TRF) WB; IHC; ICC; IP.
LAC036Mu81 FITC-Linked Polyclonal Antibody to Transferrin (TRF) WB; IHC; ICC; IF.
LAC036Mu71 Biotin-Linked Polyclonal Antibody to Transferrin (TRF) WB; IHC; ICC.
HEC036Mu High Sensitive ELISA Kit for Transferrin (TRF) Enzyme-linked immunosorbent assay for Antigen Detection.
CEC036Mu ELISA Kit for Transferrin (TRF) Enzyme-linked immunosorbent assay for Antigen Detection.
KSC036Mu11 ELISA Kit DIY Materials for Transferrin (TRF) Main materials for "Do It (ELISA Kit) Yourself".