CLIA Kit for Complement 1 Inhibitor (C1INH)

SERPING1; C1IN; C1-INH; C1NH; HAE1; HAE2; Serpin Peptidase Inhibitor Clade G Member 1; Angioedema Hereditary; C1 Inhibitor; C1 Esterase Inhibitor

Specificity

This assay has high sensitivity and excellent specificity for detection of Complement 1 Inhibitor (C1INH).
No significant cross-reactivity or interference between Complement 1 Inhibitor (C1INH) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Complement 1 Inhibitor (C1INH) and the recovery rates were calculated by comparing the measured value to the expected amount of Complement 1 Inhibitor (C1INH) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 78-97 91
EDTA plasma(n=5) 94-101 98
heparin plasma(n=5) 93-104 98

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Complement 1 Inhibitor (C1INH) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Complement 1 Inhibitor (C1INH) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Complement 1 Inhibitor (C1INH) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 78-93% 78-97% 82-94% 79-103%
EDTA plasma(n=5) 87-103% 87-103% 89-96% 96-103%
heparin plasma(n=5) 98-105% 78-97% 87-95% 81-96%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
Substrate A 1×10mL Substrate B 1×2mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Brain Res Bull Association of increase in Serping1 level with dopaminergic cell reduction in an MPTP-induced Parkinson's disease mouse model Pubmed: 32485229
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPA235Hu01 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
RPA235Hu02 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
PAA235Hu01 Polyclonal Antibody to Complement 1 Inhibitor (C1INH) WB; IHC; ICC; IP.
PAA235Hu02 Polyclonal Antibody to Complement 1 Inhibitor (C1INH) WB; IHC; ICC; IP.
LAA235Hu71 Biotin-Linked Polyclonal Antibody to Complement 1 Inhibitor (C1INH) WB; IHC; ICC.
LAA235Hu81 FITC-Linked Polyclonal Antibody to Complement 1 Inhibitor (C1INH) WB; IHC; ICC; IF.
MAA235Hu21 Monoclonal Antibody to Complement 1 Inhibitor (C1INH) WB
MAA235Hu22 Monoclonal Antibody to Complement 1 Inhibitor (C1INH) WB; IHC; ICC; IP.
MAA235Hu23 Monoclonal Antibody to Complement 1 Inhibitor (C1INH) WB; IHC; ICC; IP.
LAA235Hu72 Biotin-Linked Monoclonal Antibody to Complement 1 Inhibitor (C1INH) WB; IHC; ICC.
SEA235Hu ELISA Kit for Complement 1 Inhibitor (C1INH) Enzyme-linked immunosorbent assay for Antigen Detection.
SCA235Hu CLIA Kit for Complement 1 Inhibitor (C1INH) Chemiluminescent immunoassay for Antigen Detection.
LMA235Hu Multiplex Assay Kit for Complement 1 Inhibitor (C1INH) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.