CLIA Kit for Zinc Finger Homeobox Protein 1B (ZFHX1B)

ZEB2; SIP1; SIP-1; SMADIP1; SIP1; Zinc Finger E-Box Binding Homeobox 2; SMAD Interacting Protein 1

Specificity

This assay has high sensitivity and excellent specificity for detection of Zinc Finger Homeobox Protein 1B (ZFHX1B).
No significant cross-reactivity or interference between Zinc Finger Homeobox Protein 1B (ZFHX1B) and analogues was observed.

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Zinc Finger Homeobox Protein 1B (ZFHX1B) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Zinc Finger Homeobox Protein 1B (ZFHX1B) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
Substrate A 1×10mL Substrate B 1×2mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

GIVEAWAYS

INCREMENT SERVICES

Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
RPJ819Mu02 Recombinant Zinc Finger Homeobox Protein 1B (ZFHX1B) Positive Control; Immunogen; SDS-PAGE; WB.
RPJ819Mu01 Recombinant Zinc Finger Homeobox Protein 1B (ZFHX1B) Positive Control; Immunogen; SDS-PAGE; WB.
PAJ819Mu02 Polyclonal Antibody to Zinc Finger Homeobox Protein 1B (ZFHX1B) WB; IHC; ICC; IP.
PAJ819Mu01 Polyclonal Antibody to Zinc Finger Homeobox Protein 1B (ZFHX1B) WB; IHC; ICC; IP.
SEJ819Mu ELISA Kit for Zinc Finger Homeobox Protein 1B (ZFHX1B) Enzyme-linked immunosorbent assay for Antigen Detection.
SCJ819Mu CLIA Kit for Zinc Finger Homeobox Protein 1B (ZFHX1B) Chemiluminescent immunoassay for Antigen Detection.
LMJ819Mu Multiplex Assay Kit for Zinc Finger Homeobox Protein 1B (ZFHX1B) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.