ELISA Kit for BH3 Interacting Domain Death Agonist (Bid)

p22 BID

Specificity

This assay has high sensitivity and excellent specificity for detection of BH3 Interacting Domain Death Agonist (Bid).
No significant cross-reactivity or interference between BH3 Interacting Domain Death Agonist (Bid) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant BH3 Interacting Domain Death Agonist (Bid) and the recovery rates were calculated by comparing the measured value to the expected amount of BH3 Interacting Domain Death Agonist (Bid) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 81-101 96
EDTA plasma(n=5) 86-101 96
heparin plasma(n=5) 88-95 92

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level BH3 Interacting Domain Death Agonist (Bid) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level BH3 Interacting Domain Death Agonist (Bid) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of BH3 Interacting Domain Death Agonist (Bid) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 92-101% 80-89% 83-101% 87-104%
EDTA plasma(n=5) 81-93% 90-101% 88-96% 92-105%
heparin plasma(n=5) 89-101% 85-93% 95-103% 78-95%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPA629Hu01 Recombinant BH3 Interacting Domain Death Agonist (Bid) Positive Control; Immunogen; SDS-PAGE; WB.
PAA629Hu01 Polyclonal Antibody to BH3 Interacting Domain Death Agonist (Bid) WB; IHC
LAA629Hu71 Biotin-Linked Polyclonal Antibody to BH3 Interacting Domain Death Agonist (Bid) WB; IHC; ICC.
LAA629Hu81 FITC-Linked Polyclonal Antibody to BH3 Interacting Domain Death Agonist (Bid) WB; IHC; ICC; IF.
MAA629Hu22 Monoclonal Antibody to BH3 Interacting Domain Death Agonist (Bid) WB; IHC; ICC; IP.
MAA629Hu21 Monoclonal Antibody to BH3 Interacting Domain Death Agonist (Bid) WB; IHC; ICC; IP.
SEA629Hu ELISA Kit for BH3 Interacting Domain Death Agonist (Bid) Enzyme-linked immunosorbent assay for Antigen Detection.
LMA629Hu Multiplex Assay Kit for BH3 Interacting Domain Death Agonist (Bid) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
PSA629Hu01 Antibody Pair for BH3 Interacting Domain Death Agonist (Bid) ELISA; CLIA; ELISPOT; Luminex; Immunochromatography and other Immunoassays.
KSA629Hu01 ELISA Kit DIY Materials for BH3 Interacting Domain Death Agonist (Bid) Main materials for "Do It (ELISA Kit) Yourself".