ELISA Kit for Bone Sialoprotein (BSP)

IBSP; Bsp; BspII; SpII; Integrin-Binding Bone Sialoprotein; Cell-binding sialoprotein; Bone sialoprotein 2

Specificity

This assay has high sensitivity and excellent specificity for detection of Bone Sialoprotein (BSP).
No significant cross-reactivity or interference between Bone Sialoprotein (BSP) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Bone Sialoprotein (BSP) and the recovery rates were calculated by comparing the measured value to the expected amount of Bone Sialoprotein (BSP) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 94-101 98
EDTA plasma(n=5) 79-101 84
heparin plasma(n=5) 79-93 90

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Bone Sialoprotein (BSP) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Bone Sialoprotein (BSP) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Bone Sialoprotein (BSP) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 78-98% 91-101% 96-105% 78-95%
EDTA plasma(n=5) 85-101% 83-98% 99-105% 95-102%
heparin plasma(n=5) 92-104% 87-94% 89-98% 95-103%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
FEBS Letters Low-intensity pulsed ultrasound-induced ATP increases bone formation via the P2X7 receptor in osteoblast-like MC3T3-E1 cells Pubmed:25542352
Journal of Dental Research Adiponectin Promotes Human Jaw Bone Marrow Stem Cell Osteogenesis Pubmed:26961489
circulation journal Stenotic Bicuspid and Tricuspid Aortic Valves - Micro-Computed Tomography and Biological Indices of Calcification. pubmed:28344201
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
APB092Hu61 Active Bone Sialoprotein (BSP) Cell culture; Activity Assays.
EPB092Hu62 Eukaryotic Bone Sialoprotein (BSP) Positive Control; Immunogen; SDS-PAGE; WB.
RPB092Hu01 Recombinant Bone Sialoprotein (BSP) Positive Control; Immunogen; SDS-PAGE; WB.
EPB092Hu61 Eukaryotic Bone Sialoprotein (BSP) Positive Control; Immunogen; SDS-PAGE; WB.
PAB092Hu01 Polyclonal Antibody to Bone Sialoprotein (BSP) WB; IHC; ICC; IP.
MAB092Hu22 Monoclonal Antibody to Bone Sialoprotein (BSP) WB; IHC; ICC; IP.
SEB092Hu ELISA Kit for Bone Sialoprotein (BSP) Enzyme-linked immunosorbent assay for Antigen Detection.
LMB092Hu Multiplex Assay Kit for Bone Sialoprotein (BSP) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.