ELISA Kit for Kininogen 1 (KNG1)

BDK; KNG; HMWK; Alpha-2-Thiol Proteinase Inhibitor; Bradykinin; Kallidin; Fitzgerald factor; High molecular weight kininogen; Williams-Fitzgerald-Flaujeac factor; Ile-Ser-Bradykinin


This assay has high sensitivity and excellent specificity for detection of Kininogen 1 (KNG1).
No significant cross-reactivity or interference between Kininogen 1 (KNG1) and analogues was observed.


Matrices listed below were spiked with certain level of recombinant Kininogen 1 (KNG1) and the recovery rates were calculated by comparing the measured value to the expected amount of Kininogen 1 (KNG1) in samples.

Matrix Recovery range (%) Average(%)
sodium citrate plasma(n=5) 88-95 92


Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Kininogen 1 (KNG1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Kininogen 1 (KNG1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%


The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Kininogen 1 (KNG1) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
sodium citrate plasma(n=5) 90-101% 79-99% 82-104% 96-104%


The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.



Magazine Citations
PLoS One Higher Serum Angiotensinogen Is an Indicator of IgA Vasculitis with Nephritis Revealed by Comparative Proteomes Analysis PubMed: 26098644
Universität Leipzig, Dissertation Einfluss zyklischer mechanischer Dehnung auf das Kinin-Kallikrein-System in alveolären Typ-II-Zellen der Ratte 21931
Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
RPB267Mu01 Recombinant Kininogen 1 (KNG1) Positive Control; Immunogen; SDS-PAGE; WB.
RPB267Mu02 Recombinant Kininogen 1 (KNG1) Positive Control; Immunogen; SDS-PAGE; WB.
PAB267Mu02 Polyclonal Antibody to Kininogen 1 (KNG1) WB; IHC; ICC; IP.
PAB267Mu01 Polyclonal Antibody to Kininogen 1 (KNG1) WB; IHC; ICC; IP.
SEB267Mu ELISA Kit for Kininogen 1 (KNG1) Enzyme-linked immunosorbent assay for Antigen Detection.
KSB267Mu01 ELISA Kit DIY Materials for Kininogen 1 (KNG1) Main materials for "Do It (ELISA Kit) Yourself".