ELISA Kit for Solute Carrier Family 27 Member 5 (SLC27A5)

FATP5; ACSB; ACSVL6; FACVL3; VLACSR; BACS; VLCSH2; Fatty Acid Coenzyme A Ligase Very Long Chain 3; Fatty Acid Transport Protein 5; Bile Acyl CoA Synthetase

Specificity

This assay has high sensitivity and excellent specificity for detection of Solute Carrier Family 27 Member 5 (SLC27A5).
No significant cross-reactivity or interference between Solute Carrier Family 27 Member 5 (SLC27A5) and analogues was observed.

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Solute Carrier Family 27 Member 5 (SLC27A5) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Solute Carrier Family 27 Member 5 (SLC27A5) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
RPB660Mu01 Recombinant Solute Carrier Family 27 Member 5 (SLC27A5) Positive Control; Immunogen; SDS-PAGE; WB.
RPB660Mu02 Recombinant Solute Carrier Family 27 Member 5 (SLC27A5) Positive Control; Immunogen; SDS-PAGE; WB.
PAB660Mu01 Polyclonal Antibody to Solute Carrier Family 27 Member 5 (SLC27A5) WB; IHC; ICC; IP.
PAB660Mu02 Polyclonal Antibody to Solute Carrier Family 27 Member 5 (SLC27A5) WB; IHC; ICC; IP.
LAB660Mu81 FITC-Linked Polyclonal Antibody to Solute Carrier Family 27 Member 5 (SLC27A5) WB; IHC; ICC; IF.
LAB660Mu71 Biotin-Linked Polyclonal Antibody to Solute Carrier Family 27 Member 5 (SLC27A5) WB; IHC; ICC.
SEB660Mu ELISA Kit for Solute Carrier Family 27 Member 5 (SLC27A5) Enzyme-linked immunosorbent assay for Antigen Detection.
LMB660Mu Multiplex Assay Kit for Solute Carrier Family 27 Member 5 (SLC27A5) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.