ELISA Kit for S100 Calcium Binding Protein A4 (S100A4)

S100-A4; MTS1; 18A2; 42A; CAPL; P9KA; PEL98; Calcium protein; Calvasculin; Metastasin; Protein Mts1; Placental calcium-binding protein; Murine placental homolog

Specificity

This assay has high sensitivity and excellent specificity for detection of S100 Calcium Binding Protein A4 (S100A4).
No significant cross-reactivity or interference between S100 Calcium Binding Protein A4 (S100A4) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant S100 Calcium Binding Protein A4 (S100A4) and the recovery rates were calculated by comparing the measured value to the expected amount of S100 Calcium Binding Protein A4 (S100A4) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 87-102 91
EDTA plasma(n=5) 79-90 79
heparin plasma(n=5) 85-101 95

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level S100 Calcium Binding Protein A4 (S100A4) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level S100 Calcium Binding Protein A4 (S100A4) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of S100 Calcium Binding Protein A4 (S100A4) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 92-101% 87-94% 81-93% 83-90%
EDTA plasma(n=5) 98-105% 94-105% 91-101% 89-97%
heparin plasma(n=5) 85-102% 93-101% 79-88% 84-103%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Cell Death & Disease Tunneling-nanotube direction determination in neurons and astrocytes PubMed: PMC3542613
Cancers An Integrated Bioinformatics Analysis Repurposes an Antihelminthic Drug Niclosamide for Treating HMGA2-Overexpressing Human Colorectal Cancer Pubmed: 31581665
Biology The Roles of S100A4 and the EGF/EGFR Signaling Axis in Pulmonary Hypertension with Right Ventricular Hypertrophy Pubmed:35053115
Expert Opinion on Therapeutic Targets Dapagliflozin mitigates ovalbumin-prompted airway inflammatory-oxidative successions and associated bronchospasm in a rat model of allergic asthma Pubmed:35549595
Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
RPC020Mu01 Recombinant S100 Calcium Binding Protein A4 (S100A4) Positive Control; Immunogen; SDS-PAGE; WB.
RPC020Mu02 Recombinant S100 Calcium Binding Protein A4 (S100A4) Positive Control; Immunogen; SDS-PAGE; WB.
PAC020Mu02 Polyclonal Antibody to S100 Calcium Binding Protein A4 (S100A4) WB; IHC; ICC; IP.
PAC020Mu01 Polyclonal Antibody to S100 Calcium Binding Protein A4 (S100A4) WB; IHC; ICC; IP.
LAC020Mu71 Biotin-Linked Polyclonal Antibody to S100 Calcium Binding Protein A4 (S100A4) WB; IHC; ICC.
LAC020Mu81 FITC-Linked Polyclonal Antibody to S100 Calcium Binding Protein A4 (S100A4) WB; IHC; ICC; IF.
SEC020Mu ELISA Kit for S100 Calcium Binding Protein A4 (S100A4) Enzyme-linked immunosorbent assay for Antigen Detection.
LMC020Mu Multiplex Assay Kit for S100 Calcium Binding Protein A4 (S100A4) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSC020Mu01 ELISA Kit DIY Materials for S100 Calcium Binding Protein A4 (S100A4) Main materials for "Do It (ELISA Kit) Yourself".