ELISA Kit for Syncollin (SYCN)

SYL; INSSA1; Insulin Synthesis Associated 1

Specificity

This assay has high sensitivity and excellent specificity for detection of Syncollin (SYCN).
No significant cross-reactivity or interference between Syncollin (SYCN) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Syncollin (SYCN) and the recovery rates were calculated by comparing the measured value to the expected amount of Syncollin (SYCN) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 83-97 93
EDTA plasma(n=5) 79-88 83
heparin plasma(n=5) 93-101 98

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Syncollin (SYCN) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Syncollin (SYCN) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Syncollin (SYCN) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 78-96% 89-96% 82-91% 84-91%
EDTA plasma(n=5) 78-97% 97-105% 85-103% 80-89%
heparin plasma(n=5) 79-94% 86-101% 88-105% 94-102%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Molecular & Cellular Proteomics Integrated Proteomic Profiling of Cell Line Conditioned Media and Pancreatic Juice for the Identification of Pancreatic Cancer Biomarkers PubMed: PMC3205865
BMC Cancer. Validation of four candidate pancreatic cancer serological biomarkers that improve the performance of CA19.10 Pubmed: 24007603
Clinical Cancer Research Validation of Biomarkers That Complement CA19.9 in Detecting Early Pancreatic Cancer Pubmed:25239611
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPD879Hu01 Recombinant Syncollin (SYCN) Positive Control; Immunogen; SDS-PAGE; WB.
PAD879Hu01 Polyclonal Antibody to Syncollin (SYCN) WB; IHC; ICC; IP.
MAD879Hu21 Monoclonal Antibody to Syncollin (SYCN) WB; IHC; ICC; IP.
SED879Hu ELISA Kit for Syncollin (SYCN) Enzyme-linked immunosorbent assay for Antigen Detection.
LMD879Hu Multiplex Assay Kit for Syncollin (SYCN) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.