ELISA Kit for Multimerin 2 (MMRN2)

EMILIN3; EndoGlyx-1; Elastin Microfibril Interfacer 3; Elastin microfibril interface located protein 3; EndoGlyx-1 p125/p140 subunit

Specificity

This assay has high sensitivity and excellent specificity for detection of Multimerin 2 (MMRN2).
No significant cross-reactivity or interference between Multimerin 2 (MMRN2) and analogues was observed.

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Multimerin 2 (MMRN2) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Multimerin 2 (MMRN2) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
RPF593Mu02 Recombinant Multimerin 2 (MMRN2) Positive Control; Immunogen; SDS-PAGE; WB.
RPF593Mu01 Recombinant Multimerin 2 (MMRN2) Positive Control; Immunogen; SDS-PAGE; WB.
PAF593Mu01 Polyclonal Antibody to Multimerin 2 (MMRN2) WB; IHC; ICC; IP.
PAF593Mu02 Polyclonal Antibody to Multimerin 2 (MMRN2) WB; IHC; ICC; IP.
SEF593Mu ELISA Kit for Multimerin 2 (MMRN2) Enzyme-linked immunosorbent assay for Antigen Detection.
LMF593Mu Multiplex Assay Kit for Multimerin 2 (MMRN2) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.