ELISA Kit for Cystatin 3 (CST3)
Cys-C; Cystatin C; Gamma Trace; Post-Gamma-Globulin; Neuroendocrine Basic Polypeptide; Amyloid Angiopathy And Cerebral Hemorrhage
- Product No.SEA896Hu
- Organism SpeciesHomo sapiens (Human) Same name, Different species.
- Sample TypeSerum, plasma, tissue homogenates, cell lysates, cell culture supernates and other biological fluids.
- Test MethodDouble-antibody Sandwich
- Assay Length3h
- Detection Range1.56-100ng/mL
- SensitivityThe minimum detectable dose of this kit is typically less than 0.67ng/mL.
- DownloadInstruction Manual
96T*5 96T*10 96T*100
Ensure in stock; if not, free redo!
For negotiated price and more details, please contact local distributors! US$ 445
For negotiated price and more details, please contact local distributors! US$ 2003
For negotiated price and more details, please contact local distributors! US$ 3783
For negotiated price and more details, please contact local distributors! US$ 31150
For negotiated price and more details, please contact local distributors!
This assay has high sensitivity and excellent specificity for detection of Cystatin 3 (CST3).
No significant cross-reactivity or interference between Cystatin 3 (CST3) and analogues was observed.
Matrices listed below were spiked with certain level of recombinant Cystatin 3 (CST3) and the recovery rates were calculated by comparing the measured value to the expected amount of Cystatin 3 (CST3) in samples.
|Matrix||Recovery range (%)||Average(%)|
Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Cystatin 3 (CST3) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Cystatin 3 (CST3) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Cystatin 3 (CST3) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
Reagents and materials provided
|Pre-coated, ready to use 96-well strip plate||1||Plate sealer for 96 wells||4|
|Detection Reagent A||1×120µL||Assay Diluent A||1×12mL|
|Detection Reagent B||1×120µL||Assay Diluent B||1×12mL|
|TMB Substrate||1×9mL||Stop Solution||1×6mL|
|Wash Buffer (30 × concentrate)||1×20mL||Instruction manual||1|
Assay procedure summary
1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.
|BioMed Research International||The Renal Effects of Vanadate Exposure: Potential Biomarkers and Oxidative Stress as a Mechanism of Functional Renal Disorders—Preliminary Studies Hindawi: 740105|
|Critical Care||Endothelial dysfunction and renal fibrosis in endotoxemia-induced oliguric kidney injury: possible role of LPS-binding protein Pubmed:25261195|
|Catalog No.||Related products for research use of Homo sapiens (Human) Organism species||Applications (RESEARCH USE ONLY!)|
|RPA896Hu01||Recombinant Cystatin 3 (CST3)||Positive Control; Immunogen; SDS-PAGE; WB.|
|PAA896Hu01||Polyclonal Antibody to Cystatin 3 (CST3)||WB; IHC; ICC; IP.|
|LAA896Hu71||Biotin-Linked Polyclonal Antibody to Cystatin 3 (CST3)||WB; IHC; ICC.|
|MAA896Hu22||Monoclonal Antibody to Cystatin 3 (CST3)||WB; IHC; ICC; IP.|
|MAA896Hu24||Monoclonal Antibody to Cystatin 3 (CST3)||WB; IHC; ICC; IP.|
|MAA896Hu26||Monoclonal Antibody to Cystatin 3 (CST3)||WB; IHC; ICC; IP.|
|MAA896Hu21||Monoclonal Antibody to Cystatin 3 (CST3)||WB; IHC; ICC; IP.|
|LAA896Hu74||Biotin-Linked Monoclonal Antibody to Cystatin 3 (CST3)||WB; IHC; ICC.|
|LAA896Hu76||Biotin-Linked Monoclonal Antibody to Cystatin 3 (CST3)||WB; IHC; ICC.|
|SEA896Hu||ELISA Kit for Cystatin 3 (CST3)||Enzyme-linked immunosorbent assay for Antigen Detection.|
|SCA896Hu||CLIA Kit for Cystatin 3 (CST3)||Chemiluminescent immunoassay for Antigen Detection.|
|PSA896Hu01||Antibody Pair for Cystatin 3 (CST3)||ELISA; CLIA; ELISPOT; Luminex; Immunochromatography and other Immunoassays.|
|KSA896Hu01||ELISA Kit DIY Materials for Cystatin 3 (CST3)||Main materials for "Do It (ELISA Kit) Yourself".|