ELISA Kit for Proteinase 3 (PR3)

MBN; PRTN3; ACPA; AGP7; C-ANCA; MBT; P29; PRK; Myeloblastin; Serine Proteinase,Neutrophil,Wegener Granulomatosis Autoantigen

Specificity

This assay has high sensitivity and excellent specificity for detection of Proteinase 3 (PR3).
No significant cross-reactivity or interference between Proteinase 3 (PR3) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Proteinase 3 (PR3) and the recovery rates were calculated by comparing the measured value to the expected amount of Proteinase 3 (PR3) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 79-101 90
EDTA plasma(n=5) 80-90 86
heparin plasma(n=5) 82-90 85

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Proteinase 3 (PR3) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Proteinase 3 (PR3) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Proteinase 3 (PR3) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 93-101% 84-92% 98-105% 97-105%
EDTA plasma(n=5) 95-103% 80-99% 79-93% 80-96%
heparin plasma(n=5) 86-99% 85-99% 93-101% 78-104%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
BioMed Research International Volume Are Proteinase 3 and Cathepsin C Enzymes Related to Pathogenesis of Periodontitis? Pubmed:24949444
electronic thesis and dissertation repository Regulation of Leukocyte-Derived Matrix Metalloproteinases and Azurophilic Enzymes in Human Diabetic Ketoacidosis Etd: 2869
United States Patent Application DIAGNOSIS AND THERAPY OF CHRONIC INFLAMMATION-INDUCED DISORDERS y2016:0011207.html
Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
RPB434Mu02 Recombinant Proteinase 3 (PR3) Positive Control; Immunogen; SDS-PAGE; WB.
RPB434Mu01 Recombinant Proteinase 3 (PR3) Positive Control; Immunogen; SDS-PAGE; WB.
PAB434Mu01 Polyclonal Antibody to Proteinase 3 (PR3) WB; IHC; ICC; IP.
PAB434Mu02 Polyclonal Antibody to Proteinase 3 (PR3) WB; IHC; ICC; IP.
LAB434Mu71 Biotin-Linked Polyclonal Antibody to Proteinase 3 (PR3) WB; IHC; ICC.
SEB434Mu ELISA Kit for Proteinase 3 (PR3) Enzyme-linked immunosorbent assay for Antigen Detection.
LMB434Mu Multiplex Assay Kit for Proteinase 3 (PR3) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.