ELISA Kit for Salivary Alpha Amylase (AMY1A)

AMY1; AMY1B; AMY1C; Ptyalin; 1,4-alpha-D-glucan glucanohydrolase 1

Specificity

This assay has high sensitivity and excellent specificity for detection of Salivary Alpha Amylase (AMY1A).
No significant cross-reactivity or interference between Salivary Alpha Amylase (AMY1A) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Salivary Alpha Amylase (AMY1A) and the recovery rates were calculated by comparing the measured value to the expected amount of Salivary Alpha Amylase (AMY1A) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 91-99 94
EDTA plasma(n=5) 94-102 98
heparin plasma(n=5) 84-101 97

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Salivary Alpha Amylase (AMY1A) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Salivary Alpha Amylase (AMY1A) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Salivary Alpha Amylase (AMY1A) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 93-105% 86-95% 79-102% 94-102%
EDTA plasma(n=5) 96-105% 97-105% 89-97% 90-97%
heparin plasma(n=5) 91-105% 80-97% 85-93% 78-102%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Journal of Baghdad College of Dentistry An Assessment of Alpha-Amylase as Salivary Psychological Stress Marker in Relation to Temporomandibular Disorders among a Sample of Dental Students Index.Php: Jbcd
Medicine Electret filter collects more exhaled albumin than glass condenser: A method comparison based on human study Pubmed:29384875
The Saliva Cortisol and Amylase Levels Related With Stress Response Compared by Different Analytical Methods
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPB482Hu02 Recombinant Salivary Alpha Amylase (AMY1A) Positive Control; Immunogen; SDS-PAGE; WB.
RPB482Hu01 Recombinant Salivary Alpha Amylase (AMY1A) Positive Control; Immunogen; SDS-PAGE; WB.
PAB482Hu01 Polyclonal Antibody to Salivary Alpha Amylase (AMY1A) WB; IHC; ICC; IP.
PAB482Hu02 Polyclonal Antibody to Salivary Alpha Amylase (AMY1A) WB; IHC; ICC; IP.
LAB482Hu71 Biotin-Linked Polyclonal Antibody to Salivary Alpha Amylase (AMY1A) WB; IHC; ICC.
LAB482Hu81 FITC-Linked Polyclonal Antibody to Salivary Alpha Amylase (AMY1A) WB; IHC; ICC; IF.
MAB482Hu23 Monoclonal Antibody to Salivary Alpha Amylase (AMY1A) WB,IHC
MAB482Hu24 Monoclonal Antibody to Salivary Alpha Amylase (AMY1A) WB; IHC.
MAB482Hu22 Monoclonal Antibody to Salivary Alpha Amylase (AMY1A) WB
MAB482Hu21 Monoclonal Antibody to Salivary Alpha Amylase (AMY1A) WB; IHC; ICC; IP.
SEB482Hu ELISA Kit for Salivary Alpha Amylase (AMY1A) Enzyme-linked immunosorbent assay for Antigen Detection.
LMB482Hu Multiplex Assay Kit for Salivary Alpha Amylase (AMY1A) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.