ELISA Kit for Cytokeratin 10 (CK10)

K10; KRT10; KPP; Keratin 10; Epidermolytic Hyperkeratosis; Keratosis Palmaris Et Plantaris; Keratin, type I cytoskeletal 10


This assay has high sensitivity and excellent specificity for detection of Cytokeratin 10 (CK10).
No significant cross-reactivity or interference between Cytokeratin 10 (CK10) and analogues was observed.


Matrices listed below were spiked with certain level of recombinant Cytokeratin 10 (CK10) and the recovery rates were calculated by comparing the measured value to the expected amount of Cytokeratin 10 (CK10) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 99-105 102
EDTA plasma(n=5) 80-95 83
heparin plasma(n=5) 89-103 94


Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Cytokeratin 10 (CK10) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Cytokeratin 10 (CK10) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%


The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Cytokeratin 10 (CK10) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 94-102% 98-105% 79-101% 97-105%
EDTA plasma(n=5) 81-101% 97-105% 88-102% 78-98%
heparin plasma(n=5) 85-102% 83-90% 80-97% 81-105%


The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.



Magazine Citations
Surgical & Cosmetic Dermatology In vitro evaluation of four commercially available liquid soaps (in Brazil) for their anti-inflammatory and protective skin barrier qualities, as well as their impact on the reduction of cutaneous hypersensitivity. Exportar-Pdf: 7
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPB691Hu01 Recombinant Cytokeratin 10 (CK10) Positive Control; Immunogen; SDS-PAGE; WB.
PAB691Hu01 Polyclonal Antibody to Cytokeratin 10 (CK10) WB; ICC; IHC-P; IHC-F; ELISA.
MAB691Hu22 Monoclonal Antibody to Cytokeratin 10 (CK10) WB; IHC; ICC; IP.
SEB691Hu ELISA Kit for Cytokeratin 10 (CK10) Enzyme-linked immunosorbent assay for Antigen Detection.